Need to go for a body piercing but do not want something too deep? You can try out Surface Piercing. Read on to know all about Surface Piercing, know how it is done and how should care for it.

What is a Surface Piercing?

Surface Piercing is a kind of body piercing that is done on the surface of the skin. In case of a Surface Piercing, two holes are created on the same skin plane. The piercing does not travel too deep and penetrates the skin only a little.

Much like other types of body piercing, Surface Piercing is done to let the piercee wear jewelries and make a fashion statement.

Want to step up your appeal with a cool piece of ring on your ear? The easiest way of doing so is getting a Snug Piercing but it is important that you know about the process before you actually go for it.

What is a Snug Piercing?

Picture 1 – Snug Piercing
Source – 3fatchicks

Snug Piercing simply means the process of making a perforation in the snug, a spot in the middle position of outer ear ring, a little above the anti-tragus. The snug is a thin, shallow region of the cartilage which makes it easily to be pierced.

Snug Ear Piercings are mainly done to let the piercee wear a piece of jewelry on the ear. It is also known as Antihelix Piercing.

How Snug Piercing Is Done?

Show the piercer where you want to have the perforation. The professional will probably mark the entry and exit points with a surgical marker. Ask the person if he/she is using sterilized needles. You have a right to know about your safety. Proceed only if you are fully satisfied. Else, walk out of the place.

Next, an anesthetic injection will be administered to your snug. This does not hurt more than a gentle sting. The area will be cleaned with a disinfectant solution.

The actual piercing will then be carried out. Under anesthesia, you will not feel any pain. The needle will soon penetrate your flesh and come out of it. The jewellery will be immediately inserted into the pierced region. There will be a little bleeding which the piercer will clean away. Another round of cleaning will follow.

Snug Piercing Aftercare

Snug Piercing care mainly consists of cleaning the recently pierced snug using saline solution. Make a solution using 1-2 tsp of salt and 8 ounces (1 glass) of water. Make small cotton balls. Soak one of them into the salt-water solution. Sit before a mirror and press the ball against the snug and rub very gently to wash away any dirt or germ. Throw it away and take another one. Repeat the process for another 4 minutes.

Perform the salt water cleaning session 2-3 times every day.

Thinking of getting a piercing on your chest and making it further attractive with a ring? Read on and know all about Sternum Piercing before you actually go for it.

What is a Sternum Piercing?

Sternum Piercing is a kind of piercing or perforation made on the sternum. Sternum is the breastbone or the flat bone that unites with the clavicles and the first seven pairs of chest ribs. Sternum Piercing is made horizontally or vertically over the sternum.

Sternum Piercing Information

You will have to choose jewelry, if you do not take along one of your own choice. The actual piercing process begins after you choose an ornament for yourself.

You should mention which type of piercing you want to go for – a vertical Sternum Piercing or a horizontal Sternum Piercing. You have to show where you want to get the piercing done. The piercer will mark the entry and exit points of the needle with a surgical pen and then clean the area with an antibacterial solution to prevent at a later stage.

Sternum Piercing is a surface piercing and does not involve perforation of the flesh. The needle will pass just over the flesh. Once the needle comes out, the jewelry will be inserted into the holes and fixed.

The piercer will once again clean the area to remove any trace of blood. The skin region will be washed once more to prevent infection. The professional will provide you with aftercare instructions and will probably hand you over a brief manual consisting of all the necessary directions.

Sternum Piercing Jewelry

A Sternum Piercing is usually decorated with a surface bar, having two 90 degree bends. Two metal balls are placed on both ends of the bar. Surface bars are available in different kinds of metals such as steel, niobium and titanium. Titanium Surface Bars are usually recommended as they are less likely to give rise to skin allergies.

Barbells are also recommended for Sternum Piercings. Teflon and tygon barbells are quite flexible and are typically used by many piercers.

Sternum Piercing Healing Time

With proper care and cleaning, a pierced sternum may heal completely in four to six weeks. However, an infection or other complications such as rejection or migration can delay the healing process.

How Bad Does A Sternum Piercing Hurt?

In Sternum Piercing pain is very much like any other kind of body piercing. Any kind of Body Piercing involves perforation of the skin surface as well as the underlying tissues in some cases. This usually involves perforating blood capillaries which results in a little bleeding. Naturally, any body piercing is painful though the amount of pain depends on the region of perforation.

It ultimately depends on how much pain you can bear. Some people have higher pain tolerance than others. You can go for Sternum Piercing if your pain threshold is high. Sternum Chest Piercing involves a fair amount of pain.

So you have decided to pierce your lips and give yourself a spidery appearance? Before you really go for a Spider Bites Piercing, it is important that you check where you should get it from and how to get it done safely. There are also some Spider Bites Lip Piercing pictures that can give you an idea about the process.

What Are Spider Bites Piercings?

Picture 1 – Spider Bites Piercing
Source – tfster

Spider Bites Piercings are piercings or perforations made on the lips of a person to let him or her wear a piece of jewelry. It is better known as ‘Double Lip Piercing’ which indicates that two perforations are made on the lip, either the upper or the lower one, to enable wearing jewelry.

Spider Bites Piercing Information

If you are interested in getting a double Spider Bites Piercing, you should look for a good professional piercing studio. There are lots of freelancers who can carry out a piercing, but not as safely and professionally as is done in a studio. If any of your friends has done a Spider Bites Piercing from a studio, you can ask them if they were satisfied with the services. If they were, probably you will too. You can also visit any studio in your locality and fix up an appointment with it if you find the services satisfying.

Turn up on the exact time to avoid any rush. This will let you enjoy the full attention of a professional piercer.

Before the piercing begins, you will be handed over a consent form. You will have to sign this to express your approval about undergoing the process. You may also have to furnish an authentic identity proof. Do not forget to carry one.

The paperwork over, the piercer will brief you about the entire procedure. You will have to choose a piece of jewelry to wear on your lip. Ask your piercer which jewelry is best suited for you. Generally, a labret is used as an initial jewelry.

The actual process will then begin. The piercer will sterilize the spots that are to be pierced. The entry and exit points of the needle will also be marked with a surgical marker.

A clamp may or may not be used to hold the region steady. You will feel the surgical needle enter and exit through your flesh.

The pierced area will be thoroughly cleaned again to remove all traces of blood. The labrets will be inserted into the spots immediately after this.

The piercer will provide you with aftercare instructions or hand over a printed leaflet containing all necessary directions to look after your perforated region.

Does Spider Bites Piercing Hurt?

Spider Bites Piercing can hurt a bit as the surgical needle moves through the surface and passes through the tissues of the lip. How much it hurts actually depends on the amount of pain you can bear. If you have a low threshold for pain, this is not for you. Any type of body piercing involves some pain. This is the reason why Body Piercing is called a painful pleasure.

Thinking of going for a Scaffold(Industrial) Piercing? Read on and know where and how you should get a Scaffold Piercing done before you really go out to get one.

What Is An Industrial (Scaffold) Piercing?

Picture 1 – Industrial Piercing
Source – industrial-piercing

Scaffold Piercing is a special kind of body piercing that is usually carried out on the upper ear cartilage. It involves carrying out two perforations, one near the head and the other down the cartilage.

Scaffold Piercing is also known as ‘Construction Piercing’. In North America, it is also referred to as ‘Industrial Piercing’.

How Is An Industrial Piercing Done?

Want to know how is a scaffold piercing done? An Industrial Piercing should best be carried out from a reputed piercing parlor. Try to find out if there is a good one in your locality. If you have the time, you should visit it personally to check the quality of services. Once you are satisfied, you can fix up an appointment.

Show up on the exact day at the right hour. This will help you get the complete attention of a professional piercer. You may be needed to show the piercer an identity proof. Make sure that you carry one.

The piercer will hand you over a consent form to sign. Once you are done with the paperwork, the piercer will ask you where to carry out the piercing. Show the spot where you want it to be done. Industrial Piercing is generally carried out on the upper ear cartilage.

You will be asked to choose a piece of jewelry in case you do not already have one with you. Ask the piercer about the best type of anchor for you. Also share any past experiences of allergy and irritation that you may have had from using a particular kind of jewelry.

The piercer will mark the entry and exit spots of the needle on your ear and sterilize them with an antiseptic solution. Piercing begins once the liquid dries.

The piercer will use a sterilized needle to carry out a double perforation on your ear. The anchor will be immediately inserted into the Industrial Piercing holes. The pierced spots will again be cleaned to avoid infection and remove all traces of blood.

Following perforation, the piercer will provide you with aftercare instructions. The directions may be given orally or handed over in the form of a leaflet.

Industrial Piercing Prices & Cost

The price for industrial piercing varies depending on where you get it from. Industrial piercing price is more in a reputed piercing parlor. Freelancers will charge you less but the quality of piercing and the safety standards are not exactly satisfying.

On an average, Industrial Piercing costs around $40. The jewelry usually costs $15-20 alone. But it can cost you more.

Industrial Piercing Jewelry

Industrial Piercing jewelry is usually a barbell. A barbell comes in different shapes, sizes and metals. Barbell jewelries made of surgical steel and titanium are considered to be the best choice for an Industrial Piercing. These Scaffold Piercing bars are less likely to cause problems like irritation or infection. Many go for Scaffold Ear Piercing bars containing studs of varied colors. These are twisted, spiraled and middle-finger shaped jewelries that you can choose from.

Industrial Piercing Gauge

Industrial Piercing gauge size is usually 14 g. A hollow 14 g needle is typically used to carry out a perforation of this type.

Scaffold Piercing Aftercare

Industrial Piercing aftercare generally involves one or more of these steps.

Salt Water Washes

This is one of the most standard aftercare methods for any type of body piercing. Mix ½ tsp of natural, non-iodized sea salt into a cup of clear, lukewarm water. Soak a small cotton swab with a small amount of this solution and press on the pierced spot. Rub gently to clean the area. Repeat the process with another clean swab. The session should last for 5-6 minutes, once in the morning and once in the evening daily for at least a month after piercing.

Antibacterial Wash

Regularly wash the perforated spot with a mild antibacterial soap. Do not use a strong soap or peroxide on the area as you may suffer from irritation.

Avoid Injuries

Try to avoid injuring the area for at least a month after the piercing. Also avoid playing with the jewelry in the pierced spot. This may make the wound active once again and result in problems like infection, rejection and migration.

Avoid Germs

Do not touch the region with unclean hands. This will transmit dirt and germs to the spot from your fingers and give rise to bacterial infection.